Services
Hydrostatic Testing of Fire Extinguishers
- All cylinders are tested using our Automated Hydrostatic Water Jacket Cylinder Test System
- Cylinders are tested to meet DOT requirements.
- IRP technicians are Hazmat trained to requalify cylinders under U.S. Department of Transport title 49 ƥ 172 subpart H
- Hose Inspected under NFPA 10 2013 subsection 7.6
CATALOG/DATA SHEET
Inspection and Recertification of Fire Extinguishers
- Shall be done under NFPA 10 Chapter 7 in conjunction with the OEM Manual to meet industrial standards
- Extinguishers are inspected to ensure it is free of defects and are fit for service
- All extinguishers are properly labelled and tagged, marking inspection date and the next recertification date
- On Site or at our Facility
CATALOG/DATA SHEET
Service & Recharge of Fire Extinguishers
- Shall be done under NFPA 10 2013 Standards Chapter 7 and shall be carried out only by trained and competent personnel utilising OEM service parts
- Technicians are trained with over twenty-five (25) years of service experience
- Quick turn around for repairs and recharging of extinguishers
CATALOG/DATA SHEET
Hydrostatic Testing of Suppression Cylinder
- All Suppression cylinders are low pressure tested to meet DOT requirements and Guidelines by NFPA 17A Standard for Wet Chemical Extinguishing Systems
- IRP technicians are Hazmat trained to requalify cylinders under U.S. Department of Transport title 49 ƥ 172 subpart H
CATALOG/DATA SHEET
Recharge of Suppression Cylinder
- Refilling and Recertification of cylinders shall be done under OEM recommendations & NFPA 17A Standard for Wet Chemical Extinguishing Systems
- All cylinders are cleaned and inspected internally for defects before refilling
- All cylinders are properly labelled and tagged, marking inspection date and next recertification date
CATALOG/DATA SHEET
Inspection and Recertification of Kitchen Suppression Cylinder
- Inspection of cylinders shall be done under OEM recommendations & NFPA 17A Standard for Wet Chemical Extinguishing Systems
- All cylinders are cleaned during inspection to be free of grease and grime
- Recommended at least every 6 months
CATALOG/DATA SHEET
Degreasing Kitchen Suppression System Hood
- Degreasing is done by fully competent and experienced technicians
- Care is taken to protect the client's equipment and the surrounding areas before degreasing
- Recommended at least every 6 months
CATALOG/DATA SHEET
Inspection & Recertification of Clean Agent Suppression Systems
- Fire Suppression Systems are serviced and tested under NFPA 2001 Standard on Clean Agent Fire Extinguishing Systems
CATALOG/DATA SHEET
Refill of Clean Agent Suppression Cylinders
- Refilling and Recertification of cylinders shall be done in accordance with OEM recommendations & NFPA 2001 Standard on Clean Agent Fire Extinguishing Systems.
CATALOG/DATA SHEET
Hydrostatic Testing of Clean Agent Suppression Cylinders
- All Suppression cylinders are low pressure tested to meet DOT requirements and Guidelines by NFPA 2001 Standard on Clean Agent Fire Extinguishing Systems
- IRP technicians are Hazmat trained to requalify cylinders under U.S. Department of Transport title 49 ƥ 172 subpart H
CATALOG/DATA SHEET
TRIMAX Compressed Air Foam (CAF) Systems
- Commissioning will include inspection, preparation for testing and 10 second discharge. Refilling of the system after testing is included (Less consumables)
- It shall be done as per OEM recommendations as well as NFPA 10 2013, NFPA 25 and NFPA 1962
- Inspection of Trimax is done as per OEM recommendations as well as NFPA 10 2013, NFPA 25 and NFPA 1962
- Recommended Annually
CATALOG/DATA SHEET
Recertification of Components
Recertification under OEM recommendations, NFPA 25, ASTM A515/515M 17 Standard as well as OSH Act.
CATALOG/DATA SHEET
Inspection & Recertification of Foam Carts
- It shall be done as per OEM recommendations as well as NFPA 10 2013, NFPA 25 and NFPA 1962
CATALOG/DATA SHEET
Installation of Fire Hose Reels
- Fire hoses shall be installed following the guidelines as per NFPA 1962 Standard for the Care, Use, Inspection, Service Testing, and Replacement of Fire Hose, Couplings, Nozzles, and Fire Hose Appliances, and BS-en-617 standards
CATALOG/DATA SHEET
Service & Repair Fire Hose
- Fire hoses shall be repaired using OEM guidelines along with NFPA 1962 Standard for the Care, Use, Inspection, Service Testing, and Replacement of Fire Hose, Couplings, Nozzles, and Fire Hose Appliances
CATALOG/DATA SHEET
Pressure Testing of Fire Hose
- Pressure testing of fire hoses shall be carried out under NFPA 1962 Standard for the Care, Use, Inspection, Service Testing, and Replacement of Fire Hose, Couplings, Nozzles, and Fire Hose Appliances by a trained Service Technician
- Pressure testing is done using certified hose testing equipment
- Each hose test is graphically recorded for the duration of the test
- Onsite or at our facility
CATALOG/DATA SHEET
Inspection of Building System Hose Reels
- Inspection of Building System Hose Reels under EN 671-3:2009 (E)
- Inspection of Industrial Systems Hose Reels under NFPA requirements
CATALOG/DATA SHEET
Inspection & Recertification
- Inspection of Fire Pumps should be done under NFPA 25 Chapter 8
- For on-site services, there is a charge for Pump Testing Equipment.
- Testing Misc. consumables are also an adder.
CATALOG/DATA SHEET
Inspection & Recertification of MSA SCBA and Airline Respirators
- Service includes the Annual Flow Test recommended by the Manufacturer and under NFPA 1852 Standard, Care, and Maintenance of Open-Circuit Self-Contained Breathing Apparatus (SCBA)
CATALOG/DATA SHEET
SCBA & Respirator Facepiece Fit Testing
- Test using Porta Count Pro respirator fit tester, under OSHA’S
RESPIRATORY PROTECTION STANDARD 29 CFR 1910.134
CATALOG/DATA SHEET
SCBA & Respirator Facepiece Sanitizing
- Sanitization entails cleaning with MSA germicidal wipes.
- Additional Cleaning available using an Ultrasonic Bath
CATALOG/DATA SHEET
Hydrostatic Testing of SCBA Breathing Air Cylinders.
- All cylinders are tested using our Automated Hydrostatic Water Jacket Cylinder Test System. Cylinders are tested to meet DOT requirements.
- IRP technicians are Hazmat trained to requalify cylinders under U.S. Department of Transport title 49 ƥ 172 subpart H
CATALOG/DATA SHEET
Hydrostatic Testing of Supplied Air Cylinders
- All cylinders are tested using our Automated Hydrostatic Water Jacket Cylinder Test System. Cylinders are tested to meet DOT requirements.
- IRP technicians are Hazmat trained to requalify cylinders under U.S. Department of Transport title 49 ƥ 172 subpart H
CATALOG/DATA SHEET
Refilling of SCBA Breathing Air cylinder
- Cylinders are filled to Grade D specifications as outlined by NFPA 1989 Standard on Breathing Air Quality for Emergency Services Respiratory Protection
CATALOG/DATA SHEET
Refilling of Supplied Air Cylinders
- Cylinders are filled to Grade D specifications as outlined by NFPA 1989 Standard on Breathing Air Quality for Emergency Services Respiratory Protection
- IRP’s Compressors are tested for air quality on a quarterly bases as required by NFPA 1989
CATALOG/DATA SHEET
Service & Repair of Nitrogen and Breathing Air Cylinders
- Cylinder valves are evaluated, serviced and repaired for leaks and damage to the valve handles
- Any type of Painting requires a trained and competent person and shall be done under the manufacturer's requirements or that of the Client's Offshore Coating Specs.
Service & Calibration of Portable Gas Detection Instruments
- Calibration of Portable Gas Detection Instruments by Manufactured certified Technicians
- Instruments are calibrated under manufacturer's specifications and recommendations outlined by International Safety Equipment Association (ISEA) and Occupational Safety and Health Administration (OSHA).
CATALOG/DATA SHEET
Sanitization of Portable Gas Detection Instruments
- Instruments are cleaned under the manufacturer's guidance to prevent, control, and manage contact with the Coronavirus (COVID-19)
CATALOG/DATA SHEET
Preventative Maintainance of Fixed Gas Detection Systems
- Service & Calibration by Certified Manufacturers Technicians
- Recommended Quarterly
CATALOG/DATA SHEET
Preventative Maintainance of Fixed Flame Detection Systems
- Preventative Maintainance of Fixed Flame Detection Systems
- Cost of Service and Testing depends on the quantity of detectors on system.
- Instruments are serviced and tested in accordance to Manufacture specifications.
CATALOG/DATA SHEET
Preventative Maintainance of Fire Detection & Suppression Systems
- Fire Alarms Systems are serviced and tested in accordance with NFPA 70 & NPFA 72
- Fire Detection and Suppression are serviced and tested in accordance with NFPA 2001
CATALOG/DATA SHEET
Inspection Testing of Emergency Lighting / Exit Lighting
- Inspection and Testing of Emergency Lighting / Exit Lighting
CATALOG/DATA SHEET
Inspection of Fall Protection Equipment
- Fall Arrest equipment in inspected to ANSI Z359.2-2007 General Industry Best Practice Standard Minimum Requirements for a Comprehensive Managed Fall Protection Program & MSA Competent Person Fall Protection Equipment Inspection Manual, 2014
- Tripod systems is inspected as per ANSI Z359.14-2012 Safety Requirements for Self-Retracting Devices for personal fall Arrest and Rescue Systems
CATALOG/DATA SHEET
About
Fire Protection Systems are designed and installed to protect both personnel and property, including high value assets, from damage in the event of a fire. These systems could be costly to install but once properly maintained and tested, will deliver countless years of dependable service.
IRP’s competent Engineers and Technicians are factory and supplier trained and are experienced in carrying out testing and maintenance in accordance with the relevant OEM manuals and NFPA Standards. They are equipped with the necessary tools, software, and equipment to successfully carry out the testing on the full range of Fire Protection Systems available and have working relationships with foreign partners specializing in the related system.
Utilizing design information for the system and/or as-built data, IRP’s Team will record the necessary data during the testing, conduct detailed analysis of the results and provide the Client with a comprehensive report, including recommendations to correct any issues and improve the operation of the system.
Deluge System Testing
- NFPA 25- Standard for the Inspection, Testing and Maintenance of Water Based Fire Protection Systems.
- Inspection and Testing of the complete deluge system including:
- Water delivery components- pipes, pipe fittings, fire department connections, sprinkler, etc.
- Alarm and supervisory components.
- Control valves, regulating devices, gauges, etc.
- Hangers and seismic braces inspection at floor level.
CATALOG/DATA SHEET
Fire Water Pump Flow Testing
- NFPA 25- Standard for the Inspection, Testing and Maintenance of Water-Based Fire Protection Systems.
- Inspection and Testing of the Fire Water Pump.
CATALOG/DATA SHEET
Hydrant, Monitor and Ring Main Testing
- NFPA 25- Standard for the Inspection, Testing and Maintenance of Water-Based
- Fire Protection Systems.
- Inspection and Testing of the complete Hydrant and Ring Main system including:
- Inspection of hydrant barrel, monitor nozzle, hose houses.
- Water delivery components- pipe, fittings, strainers, fire department connection, etc.
- Valves, gauges, identification tags, etc.
- Structural components- thrust blocks, tie rods, etc.
CATALOG/DATA SHEET
Foam Concentrate & Proportioning
- NFPA 25- Standard for the Inspection, Testing and Maintenance of Water-Based Fire Protection Systems.
- NFPA 11 – Standard for Low-, Medium-, and High-Expansion Foam.
Services include:
- Testing of foam proportioning system.
- Testing of foam concentrate.
- All foam analysis conducted by a certified lab.
- Capable of testing any brand of foam product.
- Capable of conducting both refractometer and conductivity meter testing methods.
CATALOG/DATA SHEET
Room Integrity, Air Tightness and Safe Shelter Testing
- NFPA 2001 – Standard on Clean Agent Fire Extinguishing Systems.
- ISO 14520 – Gaseous fire-extinguishing systems — Physical properties and system design.
- BS EN 15004 – Fixed firefighting systems. Gas extinguishing systems. Design, installation, and maintenance.
- IRP’s Technicians are the only Retrotec Certified testers in the Caribbean with levels 1-3 Enclosure Integrity certification. Services include:
- Air tightness test, Room Integrity and Duct Leakage test.
- The very latest in testing technology will provide thorough, informative assessments concerning potential areas of leakage, advice and recommendations on protection and solution.
- Full retention reports.
CATALOG/DATA SHEET
Fire Truck Testing
NFPA 1901 – Standard for Automotive Fire Apparatus
BS EN 1846-3:2013 Firefighting and rescue service vehicles. Permanently installed equipment. Safety and performance
IRP’s competent Technicians are trained and are experienced in carrying out testing and maintenance in accordance with the relevant OEM manuals and NFPA Standards. They are equipped with the necessary tools, software, and equipment to successfully carry out the testing on the full range of Fire Truck Systems available and have working relationships with foreign partners specializing in the related system.
Services include:
Inspection of Lights, Sirens/Horns, Operators Panel, Engine, Body, Hoses, Monitor, Breathing Apparatus, Extinguishers, etc
Fire Pump Test as per manufacturer specification
Full retention reports.
CATALOG/DATA SHEET
About
IRP’s TAR services offer a range of packaged solutions to meet the needs of your Turnaround. Our onsite management of the equipment supported by our experience ensures every device is fit for use each day. The onsite TAR team conducts relevant inspections, testing and repairs before equipment is issued for use, ensuring the TAR fleet of equipment is not reduced during this crucial period. Our equipment management service would complement the overall objective of the TAR, providing quality work, reducing cost, and saving you time so you can focus on other critical operations during this time.
Each package can be tailored by selection to fit every stage of your operation during the Turnaround. Bundles can be assembled comprising equipment from each package, all managed and controlled by IRP’s TAR onsite team to maximise your time, minimise your cost and provide efficiency to progress your jobs.
CATALOG/DATA SHEET
INSTRUMENTS PACKAGE
The gas detection instruments offered are the standard four (4) gas diffusion, four (4) gas Pump, and four (4) gas area monitoring devices.
Option 1 – Altair 4XR Diffusion
Option 2 – Altair 5X Pump
Option 3 – Altair io360 Area Monitor
* Each instrument will be bump tested before going out on each shift
* All equipment is inspected and sanitised after each shift and is prepped for the incoming shift
* Site training is conducted and recorded with the end user before the start of turnaround (Upon client’s request)
CATALOG/DATA SHEET
RESPIRATORY PACKAGE
Our respiratory packages provide top quality respiratory equipment to keep your operations and people protected. Our onsite management of these equipment ensures the duration of work is on time and the overall operations are profitable with no downtime.
Option 1 – PremAire Cadet Escape 5 minutes
Option 2 – PremAire Cadet Escape 10 minutes
Option 3 – Industrial Airline cart 2-60 Min cylinders
Option 4 – Airline cart 2-300 cu.ft. cylinders
Option 5 – SCBA 30 minutes
Option 6 – SCBA 60 minutes
Option 7 – Air Purifying Respirator (APR)
*All equipment is inspected and tested after each use and is made ready for next issue
CATALOG/DATA SHEET
BREATHING AIR COMPRESSOR PACKAGE
Our compressor provides high pressure Grade D breathing air for quick refilling of breathing air cylinders. Our mobile compressor offers the solution to be towed anywhere on the plant for quick response to continuous operations being conducted.
Mobile Compressor – Bauer Mobile Air Compressor, certified Grade D Quality air for supplied breathing air system
* Reduces time experienced by having to fill the cylinders off-site
* Reduces the need for having large quantities of standby cylinders of breathing air
*Compressor is tested for air quality every quarter as required by NFPA 1989. Cylinders are filled to Grade D specifications as outlined by NFPA 1989 Standard on Breathing Air Quality for Emergency Services Respiratory Protection.
CATALOG/DATA SHEET
About
IRP’s Rental services provide the industry’s best safety equipment that your job demands for affordable daily, weekly, and monthly rates and long-term projects. Our rentals will save you the initial capital investment, eliminate the cost of ownership, and the storage cost when not in use.
The safety equipment on the rental fleet includes portable gas detectors, respiratory protection and coming soon, fall arrest systems. All equipment can be prepared and delivered within 24 hours for those unplanned emergency works.
CATALOG/DATA SHEET
PORTABLE GAS DETECTOR
Our gas detection instruments carry the standard four (4) gases LEL, O2, CO and H2S. We have three types of instruments on the rental fleet, which can vary depending on the nature of your operation. Pumped instruments for safety checks, diffusion instruments for personal monitoring and area monitors for continuous operations.
Option 1 – Four (4) Gas Diffusion Instrument
Altair 4X / 4XR GID, LEL, O2, H2S, CO, North American Power Supply, Glow in the Dark Case CO, LEL (0-100% Pentane), O2 (0-30% 4X ONLY), Duo Tox (CO 0-2000 ppm, H2S 0-200 ppm) CSA/ETL approval label. MSA P/N A-ALT4:-X-L-2-A-N-C-0-0-G-0
Option 2 – Four (4) Gas Pump Instrument
Altair 5X, Configured, Color Display, Sensor #1: LEL 0-100% Pentane, Sensor #2: Oxygen 0-30%m Sensor #3 (Exotic): None, Sensor #4: CO/H2S: 0-1999ppm & 0-200ppm, Advanced Sensor: None, Packaging: Red Economy, Approval Label: CSA/UL, Sampling Probe Kit Non React. MSA P/N A-ALTX5X-B-L-K-0-1-0-R-C-0-1-0
Option 3 – Four (4) Gas Area Monitor
Altair io360, Methane 0-100% LEL, 5.0 VOL%, O2 0-30%, 0-1999 PPM CO, 0-200 PPM H2S, 915 MHz (NORTH AMERICA), UL (US) Listed. MSA P/N A-ALTIO360L1ANNB01
Option 4 – Calibration Test System
Galaxy Automated Test system, c/w test stand and cylinder holder, Automated record keeping and calibration system for MSA portable gas detection instruments. System is stand-alone, requiring no computer, controller, or network interface. All gas tubing and communication paths are pre-connected.
CATALOG/DATA SHEET
BREATHING APPARATUS
Our top-quality respiratory protection fleet is equipped with Self-contained breathing apparatus (SCBA) both 30-minute and 60-minute sets, Low- and High-pressure Airline carts, Escape sets and Air purifying respirators.
Option 1 – PremAire Cadet Escape 5 minutes
PremAire Cadet, MSA 5-min Carbon Cylinder, Ultra Elite Hycar Med. Ultra Elite Medium Nose Cup, Shoulder Pad, Nylon Carrying Bag, Firehawk PTC Solid Regulator, Rubber Head Harness, QD Foster SST, AL Respirator, c/w Hardcase.
Option 2 – PremAire Cadet Escape 10 minutes
PremAire Cadet, MSA 10-min Carbon Cylinder, Ultra Elite Hycar Med. Ultra Elite Medium Nose Cup, Shoulder Pad, Nylon Carrying Bag, Firehawk PTC Solid Regulator, Rubber Head Harness, QD Foster SST, AL Respirator, c/w Hardcase.
Option 3 – Industrial Airline cart 2-60 Min cylinders
Cart, Wheeled Portable (RENTAL), Industrial, AL Respirator, Equipped with Foster Steel Quick Disconnect fittings, Two Sets double-cylinder straps, Airline-hose rack and adjustable pull handle Pressure regulator, Low-pressure cylinder alarm whistle, 125psig relief valve c/w Cylinder, MSA Stealth Custom 4500 MMR 60min. Green H-60 SCBA
Option 4 – Airline cart 2-300 cu.ft. cylinders
Cart, Breathing Air (RENTAL), 4 Port Manifold, 2 x 300, 2200 psig Cylinder, SS Flex Air-Line, SS CGA Nipple & Nut, 346, Audilarm, Regulator, 300 psi and 3000 psi Gauge, Galvanized material, painted for industrial environments, c/w cover, (kit) IRP.
Option 5 – Self-contained Breathing Apparatus (SCBA) 30 minutes
MMR, (RENTAL), Ulite HUD Fire Hawk STC Grey 2216psig, 30min.Stealth Cylinder, Air Double Pull Carrier, UElite Silicone Facepiece (HUD) Med. w/Lumbar Pad, Rubber Head Harness w/ Neck strap, Quick-Connect Slide, ICM TX w/o Heat Sensor, LCD Screen, Audible & Visual alarm, built in transmitter (w/ Hard Carrying Case)
Option 6 – Self-contained Breathing Apparatus (SCBA) 60 minutes
MMR, (RENTAL), Custom 4500 K-CMD14B00C12AD1 60 Min. Stealth Cylinder, UElite Facepiece (HUD) Med. Hycar w/Lumbar Pad, Speed-On Head Harness w/o Neck strap, Fire Hawk Regulator Quick Connect Slide, ICM TX w/o Heat Sensor (w/Hard Carrying Case)
Option 7 – Air Purifying Respirator (APR)
MSA Advantage Respirator c/w GME Cartridge and TAR Logo Pouch
Option 8 – Airline Hose
Hose, (RENTAL) MSA 50ft x 3/8″ Air-Line. Neoprene Black Univ. (c/w Fittings) Breathing Apparatus c/w Male Plug, Female Socket & Male Adapter
Option 9 – 30-minute Spare cylinder
Cylinder, (RENTAL) 2216psig, Stealth L-30min, MMR, Grey.
Option 9 – 60-minute Spare cylinder
Cylinder, (RENTAL) 4500psig, 60min Stealth H-30, Custom 4500 MMR SCBA
Option 10 – Airline 300 cu.ft. Spare cylinder Low pressure
Cylinder, Air 300 cu.ft. 2400psig., Chrome Yellow, AL Respirator, Breathing Air CGA 346 DOT# 3AA2400
Option 11 – Airline 300 cu.ft. Spare cylinder High pressure
Cylinder, Air 300 cu.ft. 4500psig., Chrome Yellow, AL Respirator, Breathing Air CGA 347 DOT# 3AA4500
*All equipment is inspected, tested, and issued for delivery with certificates
CATALOG/DATA SHEET
BREATHING AIR COMPRESSOR PACKAGE
Our compressor provides high pressure Grade D breathing air for quick refilling of breathing air cylinders. Our mobile compressor offers the solution to be towed anywhere on the plant for quick response to continuous operations being conducted.
Mobile Compressor – Bauer Mobile Air Compressor, certified Grade D Quality air for supplied breathing air system
* Reduces time experienced by having to fill the cylinders off-site
* Reduces the need for having large quantities of standby cylinders of breathing air
*Compressor is tested for air quality quarterly as required by NFPA 1989. Cylinders are filled to Grade D specifications as outlined by NFPA 1989 Standard on Breathing Air Quality for Emergency Services Respiratory Protection.
CATALOG/DATA SHEET
FLEXIBLE HOSE ASSEMBLY INTEGRITY MANAGEMENT
We support your safety at work with our Flexible Hose Assembly (FHA) Integrity Management model. We are aligned with Hydrasun and the ‘Energy Institute Guidelines for Flexible Hose Assemblies’ to effectively manage each stage of the hose integrity management process:
1. Design and Specification of FHAs for application and environment
2. Assembly, Certification and Tagging of new and replacement FHAs
3. Consultation for Installation and Routing
4. Baseline inspection surveys and Risk-Based Inspections – inclusive of software and database access
5. FHA Spares Management
6. Technical FHA Training
7. Engineering Support for every FHA need
CATALOG/DATA SHEET
FLEXIBLE HOSE ASSEMBLY CERTIFICATION
Our Technical Team is Hydrasun, BFPA and OPITO, trained and certified, to provide In-House Flexible Hose Assembly (FHA) Certification. The process entails:
Visual inspection
Hydrotesting to 1.5 times the working pressure and held for a minimum of 3 minutes
Tagging with UV protected paper tags or engraved stainless steel tags with relevant hose and test information
Provision of individual and batch Certificates
Onsite service can be provided where necessary. Equipment mobilization, rental and Technician day rates will apply.
CATALOG/DATA SHEET
SPECIALIZED COUPLING SERVICE & RE-CERTIFICATION
Our Technical Team is TODO and KLAW trained and certified, to provide Dry-Break Coupling and Break-Away Coupling Service and Certification. This process involves:
Visual inspection
Repair and Service using spare kits
Hydrotesting to 1.5 times the working pressure and held for a minimum of 3 minutes
Tagging with engraved stainless steel tags with relevant information – optional
Provision of individual Service Checklists and Certificates
CATALOG/DATA SHEET
TECHNICAL TRAINING SERVICES
We share our knowledge and experience to better equip you to operate safely. We work closely with Hydrasun to provide Integrity Management Technical Training, for both Flexible Hose Assemblies (FHAs), and Stainless Steel Small Bore Tubing (SBT). Hydrasun’s Learning & Competence Management system is accredited to the OPITO standard. Experienced trainers deliver classroom-based, practical and competence assessment training, including BFPA & ECITB training courses.
Customer specific and industry standard courses can be delivered at our Training Center or on any customer site. Chat with us about your training needs.
CATALOG/DATA SHEET